Working With The Dl7400; Preparing For An Observation - YOKOGAWA DL7440 Operation Manual

Working with the DL7400

Working with the DL7400 Working with the DL7400
This section provides an example of how you can observe a probe compensation signal being output from the DL7400.
Before connecting the power supply, you must read the warnings in the user's manual listed in
section 3.3, "Connecting the Power Supply and Turning ON/OFF the Power Switch."
IM 701450-02E

Preparing for an Observation

Connecting the Power Supply
User's manual section 3.3, "Connecting the Power Supply and Turning ON/OFF the Power Switch"
Power connector
Rear panel
Power cord (accessory)
Rated supply voltage:
Permitted supply voltage range:
Rated power supply frequency:
Permitted power supply frequency range: 48 to 63Hz
Turning the Power Switch ON and OFF
User's manual section 3.3, "Connecting the Power Supply and Turning ON/OFF the Power Switch"
Power switch
3-prong outlet
100 to 120 VAC/200 to 240 VAC
90 to 132 VAC/180 to 264 VAC
50/60 Hz
Front panel
OFF
Working with the DL7400
ON
17