Changing Waveform Display Conditions - YOKOGAWA DL7440 Operation Manual

Working with the DL7400

Changing Waveform Display Conditions

This section explains how to split the screen, and how to change settings such as the voltage or vertical axis sensitivity
and vertical position, or the time or horizontal axis.
The default number of screen divisions is four (Quad). In this case we only want to observe channel 1 so we change
the setting to Single (1 screen).
1
Press the Display key.
DISPLAY
Changing the Voltage Axis Sensitivity Setting from 0.5 V/div to 0.2 V/div
V/DIV
1
The voltage axis sensitivity setting for CH1
20
Setting the Screen Divisions to Single
Turn the T/div knob clockwise to set the voltage axis sensitivity to 0.2 V/div.
One part of the waveform goes out of view due to the
rise in the voltage axis sensitivity.
User's manual section 8.1, "Setting the Display Format"
2
Open the selection menu, then choose Single.
User's manual section 5.2, "Setting V/div"
IM 701450-02E