Connecting The Probe - YOKOGAWA DL7440 Operation Manual

Working with the DL7400
Before connecting the probe, you must read the warnings in the user's manual listed in
section 3.5, "Compensating the Probe (Phase Correction)."
Probe
Note
• For instructions on how to connect a logic probe, see section 3.6.
• When actually making waveform observations using the probe, you must follow the procedures in the user's manual for
probe phase correction (section 3.5), and calibration (section 4.6). Failure to use the probe correctly will result in incorrect
waveforms.
18

Connecting the Probe

User's manual section 3.5, "Compensating the Probe (Phase Correction)"
Probe compensation
signal output terminal
User's manual section 3.4, "Connecting the Probe"
Functional ground terminal
Phase adjustment hole
IM 701450-02E