Remote Control (12×3W Quad Ir Uv) - Stairville Outdoor Stage PAR 12x4W Quad IR RGBW User Manual

7.9 Remote control (12×3W Quad IR UV)
Switching on / off
Operating mode 'Automatic'
Dimming
If the device neither is working as Slave in a Master / Slave configuration nor is not controlled
via DMX you can control it using the remote control.
Use [ON/OFF] to turn the device on or off.
Press [AUTO]. The playback of the programmes starts automatically.
Press [SPEED] and use [+] and [–] to set the programme speed in a range from 'SP01' (slow) to
'SPFL' (fast).
Press [STROBE] and use [+] and [–] to set the flash frequency in a range from 'FS00' (slow) to
'FS99' (fast). Press [STROBE] again to disable the Strobe effect.
Press [Dimming] and set the brightness of the LED with [+] and [–] in a range from 'I.000' to 'I.
255' .
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
Operating
45