Operating
7.3 Operating mode 'Static Colour' (12×4W Quad IR RGBW)
32
This setting is only relevant if the device is working in Stand Alone mode and is not controlled
via DMX. In this mode you have the option to select a solid colour for continuous operation
and to set the flash frequency for all LEDs.
1.
Press [Mode], use [Up] and [Down] to select the menu option 'Colr' and confirm with
[Setup].
2.
Use [Up] and [Down] to set the intensity for the red colour in a range from 'r.000' ... 'r.
255' (bright ... dark) and confirm with [Setup].
3.
Use [Up] and [Down] to set the intensity for the green colour in a range from 'g.
000' ... 'g.255' (bright ... dark) and confirm with [Setup].
4.
Use [Up] and [Down] to set the intensity for the blue colour in a range from 'b.000' ... 'b.
255' (bright ... dark) and confirm with [Setup].
5.
Use [Up] and [Down] to set the intensity for the white colour in a range from 'u.
000' ... 'u.255' (bright ... dark) and confirm with [Setup].
6.
Use [Up] and [Down] to set the frequency of the strobe effect in a range from
'F5.00' ... 'F5.99' (off, slow ... fast) and confirm with [Setup].
LED PAR