Advertisement

Hz-200 DMX
hazer
user manual

Advertisement

Table of Contents
loading

Summary of Contents for Stairville Hz-200 DMX

  • Page 1 Hz-200 DMX hazer user manual...
  • Page 2 Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 02.07.2014, ID: 326263 (V2)
  • Page 3: Table Of Contents

    1.3 Symbols and signal words....................... 7 Safety instructions..........................10 Features............................... 16 Installation..............................17 Starting up..............................18 Connections and controls........................20 Operation..............................25 7.1 DIP switch operation........................27 7.2 Remote control operation......................28 7.3 DMX mode............................29 Technical data............................31 Hz-200 DMX...
  • Page 4 Table of contents Plug and connection assignments....................32 Troubleshooting............................33 Cleaning............................... 35 Protecting the environment......................37 hazer...
  • Page 5: General Notes

    If you sell the unit please make sure that the buyer also receives this manual. Our products are subject to a process of continuous development. Thus, they are subject to change. Hz-200 DMX...
  • Page 6: Further Information

    General notes 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.
  • Page 7: Notational Conventions

    In the electronic version of the manual, you can click the cross-reference to jump to the specified location. Ä ‘Cross-references’ on page 7. Example: See 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Hz-200 DMX...
  • Page 8 General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
  • Page 9 General notes Warning signs Type of danger Warning – flammable substances. Warning – suspended load. Warning – harmful or irritating substances. Warning – danger zone. Hz-200 DMX...
  • Page 10: Safety Instructions

    Safety instructions Safety instructions Intended use This device is intended to be used to produce fine haze by vaporising hazer fluid. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage.
  • Page 11 Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered electrician. Hz-200 DMX...
  • Page 12 Safety instructions WARNING! Risk of burns from flammable liquids The use of flammable liquids in this appliance can cause serious burns and prop‐ erty damages. Use only approved hazer fluids. Never fill flammable liquids into the container of the device. WARNING! Danger of slipping from condensate Hazers can produce condensate.
  • Page 13 Any claims for compensation for damages caused by using non-approved fluids are excluded. Do not let the device produce haze in poorly ventilated areas. Do not expose people with health problems (such as allergy-related respiratory symptoms, asthma) to artificial haze. Hz-200 DMX...
  • Page 14 Safety instructions NOTICE! Risk of fire Do not cover the device nor any ventilation slots. Do not place the device near any direct heat source. Keep the device away from naked flames. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture.
  • Page 15 Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. Hz-200 DMX...
  • Page 16: Features

    Features Features This hazer is suitable to be used in clubs, bars, discotheques and on stages. Special features of the device: Control via DMX, integrated DIP switches or via the supplied remote control Suitable for mobile use due to compact design hazer...
  • Page 17: Installation

    You can install the device on the wall, the ceiling or on the floor. The device must not be posi‐ tioned with more than 15° inclination during operation. The unit requires 20 cm clearance on the sides and above. Hz-200 DMX...
  • Page 18: Starting Up

    Starting up Starting up Establish all connections as long as the unit is switched off. Use the shortest possible high- quality cables for all connections. NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables.
  • Page 19 Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). Hz-200 DMX...
  • Page 20: Connections And Controls

    Connections and controls Connections and controls Front and rear side hazer...
  • Page 21 This LED is lit while the device is warming up. Once the required operating temperature is reached, the LED goes out. 8 DIP switch for setting the DMX address and the haze or air output. 9 Power LED (green). The Power LED is permanently lit during operation. 10 Mounting bracket. 11 Fog fluid container with screw-cap. Hz-200 DMX...
  • Page 22 Connections and controls 12 Liquid level indicator. 13 Haze / air nozzle. hazer...
  • Page 23 Push this button for maximum haze output; use [WIND SET] to control the amount of air. The corresponding LED lights while the function is enabled. 17 [OUTPUT] Rotary control to set the amount of haze to be output. Hz-200 DMX...
  • Page 24 Connections and controls 18 [INTERVAL] Rotary control to set the interval between two haze blasts. 19 [WIND SET] Rotary control to set the amount of air to be output. hazer...
  • Page 25: Operation

    Open the screw-cap of the liquid container and fill in the fog fluid. Make sure that no fluid is spilled or gets into the device. The easiest way is using a funnel. Fill the fluid container up to the upper level indicator [FULL]. Screw the cap firmly back on. Hz-200 DMX...
  • Page 26 Operation Turning the unit on NOTICE! Fire hazard Do not operate the machine unattended. Connect the device to the mains and switch the device on with the main switch. The appliance heats up, the red LED on the rear panel lights up. As soon as the required operating temperature is reached, the red LED on the rear panel goes out.
  • Page 27: Dip Switch Operation

    1 to 9 to [OFF] and switch 10 to [ON]. The unit then operates continuously and does not respond to DMX commands nor the remote control. The following table lists the possible settings. Function 25 % haze output 50 % haze output 75 % haze output 100 % haze output 25 % air output Hz-200 DMX...
  • Page 28: Remote Control Operation

    Operation Function 50 % air output 75 % air output 100 % air output 0: DIP switch is in ‘OFF’ position. 1: DIP switch is in ‘ON’ position. 7.2 Remote control operation If you want to control the device via the DIP switches, first set the switches 1 to 9 to [ON] and switch 10 to [OFF].
  • Page 29: Dmx Mode

    The value of the DIP switches 1-9 is binary coded. To set the desired DMX address, set the DIP switches so that the sum of the resulting numbers yields the desired DMX address. Please orient yourself by the following table. DMX address Hz-200 DMX...
  • Page 30 Operation DMX address 0: DIP switch is in ‘OFF’ position. 1: DIP switch is in ‘ON’ position. Example: To set the DMX address 10 set DIP switches 2 and 4 to ‘ON’, all others to ‘OFF’. The highest possible DMX address is 511 (all DIP switches to ‘ON’). DIP switch 10 has no function in this mode.
  • Page 31: Technical Data

    3,15 A / 250 V, slow blow, 5 mm × 20 mm Dimensions (W × D ) 233 mm × 280 mm Height of housing / incl. filling port / incl. 280 mm / 330 mm / 380 mm bracket Weight 7.5 kg Hz-200 DMX...
  • Page 32: Plug And Connection Assignments

    Plug and connection assignments Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit or ‘just’...
  • Page 33: Troubleshooting

    1. Check the address settings and the DMX polarity. 2. Try using another DMX controller. 3. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interference to DMX interface circuits. Hz-200 DMX...
  • Page 34 Troubleshooting If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. hazer...
  • Page 35: Cleaning

    Position the unit in a well ventilated place. Insert the suction hose of the haze machine into the bottle with the fog machine cleaner. Connect the device to the mains and switch it on with the main switch. Hz-200 DMX...
  • Page 36 Cleaning As soon as the required operating temperature is reached, the red LED on the rear panel goes out. The device is now operational. Let the device produce haze with maximum output volume for about 20 seconds. Insert the suction hose of the haze machine back into the fog fluid container and let the device again produce haze for about 20 seconds.
  • Page 37: Protecting The Environment

    Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Hz-200 DMX...
  • Page 38 Notes hazer...
  • Page 40 Musikhaus Thomann e.K. · Treppendorf 30 · 96138 Burgebrach · Germany · www.thomann.de...

Table of Contents