Operating
7
Operating
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
Press [Mode] to activate the main menu and select an operating mode. Use [Setup] to select
further options. Use [Up] and [Down] to change the respectively indicated value. The unit
instantly applies the displayed value, you don't need to push a button for confirmation.
If you don't press any button for about 20 seconds, the current setting will be automatically
applied and the display turns off. The set values are retained as long as the device is connected
to the mains power supply.
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
27