7.4 Operating mode 'Static Colour' (12×3W Quad IR UV)
7.5 Operating mode 'DMX' (12×4W Quad IR RGBW)
This setting is only relevant if the device is working in Stand Alone mode and is not controlled
via DMX. In this mode you have the option to select a solid colour for continuous operation
and to set the flash frequency for all LEDs.
1.
Press [Mode], use [Up] and [Down] to select the menu option 'Colr' and confirm with
[Setup].
2.
Use [Up] and [Down] to set the brightness of the LEDs in a range from 'I.000' ... 'I.255'
(bright ... dark) and confirm with [Setup].
3.
Use [Up] and [Down] to set the frequency of the strobe effect in a range from
'F5.00' ... 'F5.99' (off, slow ... fast) and confirm with [Setup].
This setting is only relevant if the device is controlled via a DMX controller.
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
Operating
33