Operating
7.1 Operating mode 'Auto Run Mode'
28
In automatic mode, all programmed shows are played sequentially in an endless loop.
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
1.
Press [Mode], use [Up] and [Down] to select the menu option 'Auto' and confirm with
[Setup].
2.
Adjust the programme speed with [Up] and [Down] in a range from 'SP.01' ... 'SP.FL'
(slow ... fast) and confirm with [Setup].
3.
Adjust the frequency of the strobe effect with [Up] and [Down] in a range from 'F5.00'
... 'F5.99' (slow ... fast) and confirm with [Setup].
LED PAR