Wacker Neuson EH 9 BL/230 Operator's Manual page 6

Safety instructions
2.2.3
2.2.4
2.2.5
2.2.6
2.2.7
2.2.8
2.2.9
2.2.10 Avoid body contact with earthed components. When breaking
2.2.11 During operation the tool holder must be closed. Tools and tool holder
2.2.12 The operation of this machine may cause broken - off pieces to be
2.2.13 Drilling and breaking hammers have to be disconnected from the
SV00046GB.fm
The operator has to switch off drilling and breaking hammers, to
disconnect them from the electric mains and to store them in such a
manner that they do not turn over be fore leaving the machines or
going on breaks.
Wear safety goggles in order to avoid injuries to the eyes.
We recommend wearing suitable working gloves.
Wear safety shoes while working with drilling and breaking hammers.
Drilling and breaking hammers are always to be operated with both
hands on the handles provided for this purpose.
When working with drilling and breaking hammers, especially when
carrying out drilling jobs, the operator has to have a firm stand,
particularly when working on scaffolding and ladders.
Drilling and breaking hammers are to be guided such that hand injuries
caused by solid objects are avoided. When carrying out demolition
jobs at elevated places, special care is required to prevent the machine
or the operator from falling.
connecting passages, make sure that there are no electric wires or gas
pipes. No one may stay in the room to which the passage is broken
through, as there is danger of injuries because of falling stones or
tools.
must be checked for wear in order to guarantee proper functioning of
holder.
flung away. Therefore, during operation, no one except the operator is
to come near this machine.
electric mains before changing tools.
Drilling and breaking hammers
4