Wiring In T12 Housing; Wiring With Foundation Fieldbus Connector - Endress+Hauser Levelflex M FMP40 Brief Operating Instructions

Levelflex M FMP40 FOUNDATION Fieldbus
3.2

Wiring in T12 housing

1. Unscrew housing cover (1).
2. Insert cable (2) through gland (3).
3. Connect cable screen to the grounding
terminal (4) within the terminal
compartment.
4. Make connection (see terminal
assignment).
5. Tighten cable gland (6).
Max. torque 10 to 12 Nm!
6. Screw on housing cover (1).
7. Switch on power supply.
3.3

Wiring with FOUNDATION Fieldbus connector

1. Insert plug (1) into bushing (2).
2. Screw firmly.
3. Ground the device according to the
desired safety concept.
Endress+Hauser
3
2
4
1 2 3 4
L00-FMP40xxx-04-00-00-xx-002
2 1
L00-FMP4xxxx-04-00-00-xx-004
Wiring
1
19