Endress+Hauser Levelflex M FMP40 Brief Operating Instructions page 43

Levelflex M FMP40 FOUNDATION Fieldbus Commissioning
5.6.2 Function "recording curve" (0E2)
This function determines whether the envelope curve is read as
• an individual envelope curve
• The current envelope curve, with cyclical refreshment
⇒
ENDRESS + HAUSER
– +
E
!
Note!
If the envelope curve mode is active on the display, the measured values are updated in a slower
cycletime. Thus, it is advisable to leave the envelope curve mode after the measuring point has
been optimised.
Endress+Hauser 43