Wiring In T12 Housing; Wiring With Foundation Fieldbus Connector - Endress+Hauser Prosonic M FMU40 Brief Operating Instructions

Ultrasonic level measurement
Hide thumbs Also See for Prosonic M FMU40:
Table of Contents

Advertisement

Prosonic M FOUNDATION Fieldbus
3.2

Wiring in T12 housing

1.
Unscrew housing cover (1).
2.
Insert cable (2) through gland (3).
3.
Connect cable screen to the grounding
terminal (4) within the terminal
compartment.
4.
Make connection (see terminal
assignment).
5.
Tighten cable gland (6).
Max.torque 10...12 Nm (7.37...8.85
lbf ft)!
6.
Screw on housing cover (1).
7.
Switch on power supply.
3.3

Wiring with FOUNDATION Fieldbus connector

1.
Insert plug (1) into bushing (2).
2.
Screw firmly.
3.
Ground the device according to the
desired safety concept.
Endress+Hauser
3
2
1 2 3 4
2
1
Wiring
4
L00-FMxxxxxx-04-00-00-xx-032
L00-FMP4xxxx-04-00-00-xx-004
15

Advertisement

Table of Contents
loading

Table of Contents