Connecting Jetbox 8100 To A Pc; Serial Console - Korenix JetBox 8100 User Manual

2.2 Connecting JetBox 8100 to a PC

There are two ways to connect JetBox 8100 to a PC: through the serial
Console port or via Telnet over the network

2.2.1 Serial Console

The serial console port gives users a convenient way of connecting to
JetBox 8100's console utility. This method is particularly useful when
using JetBox 8100 for the first time. The signal is transmitted over a
direct serial connection, so you do not need to know either of JetBox's
IP address in order to connect to the serial console utility.
Use the serial console port settings shown below.
Baud rate
Parity
Data bits
Stop bits
Flow Control
Once the connection is established, the following windows will open.
JetBox 8100 User Manaual_Linux_1.1
9600bps
None
8
1
None
Table 2-2 Serial console port setting
Figure 2-3 Serial console screen
5