Modifying Network Settings Over The Network - Korenix JetBox 8100 User Manual

Figure 2-11 Restart Network setting
NOTE : After changing the IP settings, run the 10_networing.init script
to activate the new IP address.

2.3.2 Modifying Network Settings over the Network

IP settings can be activated over the network, but the new settings will
not be saved to the flash disk without modifying the file
/etc/network.conf.
For example, type the command #ifconfig eth0 192.168.10.2 to
change the IP address of LAN interface to 192.168.1.2.
JetBox 8100 User Manaual_Linux_1.1
11