Chapter 3 Managing Embedded Linux; System Version Information; Enabling And Disabling Daemons - Korenix JetBox 8100 User Manual

Chapter 3 Managing Embedded Linux

This chapter includes information about version control, deployment,
updates, and peripherals. The information in this chapter will be particularly
useful when you need to run the same application on several JetBox 8100
units.

3.1 System Version Information

To determine the hardware capability of your JetBox 8100, and what kind
of software functions are supported, check the version numbers of your
JetBox 8100's hardware, kernel, and user file system. Contact Korenix to
determine the hardware version. You will need the Production S/N (Serial
number), which is located on the JetBox 8100's bottom label.
To check the firmware version, type:
#cat /etc/sysversion.

3.2 Enabling and Disabling Daemons

The following daemons are enabled when the JetBox 8100 boots up for the
first time.
snmpd ..........SNMP Agent daemon
telnetd ..........Telnet Server / Client daemon
inetd .............Internet Daemons
ftpd...............FTP Server / Client daemon
sshd ..............Secure Shell Server daemon
goahead ............ WWW Server daemon
16
Figure 3-1 Firmware version
JetBox 8100 User Manaual_Linux_1.1