2.3 Configuring the Ethernet Interface
JetBox 8100's network setting can be modified with the serial Console, or
online over the network.
2.3.1 Modifying Network Settings with the Serial Console
In this section, we use the serial console to modify JetBox 8100's
network settings
2.3.1.1 Change Network Configuration
Follow the instructions given in a previous section to access JetBox
8100's Console Utility via the serial Console port, and then type 'vi
/etc/network.conf' to edit network configuration file with vi editor.
2.3.1.2 Static and Dynamic IP address
Static IP address:
As shown below, 4 network addresses must be modified:
JetBox 8100 User Manaual_Linux_1.1
Figure 2-8 Edit Network configuration file
9