Dial-Up Service-Ppp; Pppoe - Korenix JetBox 8100 User Manual

4.6 Dial-up Service-PPP

PPP (Point to Point Protocol) is used to run IP (Internet Protocol) and other
network protocols over a serial link. PPP can be used for direct serial
connections (using a null-modem cable) over a Telnet link, and links
established using a modem over a telephone line. Modem / PPP access is
almost identical to connecting directly to a network through JetBox 8100's
Ethernet port. Since PPP is a peer-to-peer system.
Program name
Description
Config files
Init file
Support command
Default

4.7 PPPoE

Point-to-Point Protocol over Ethernet is a network protocol for
encapsulating Poing-to-Point Protocol(PPP) frames inside Ethernet
frames.It is used mainly with ADSL services where individual users connect
to the ADSL transceiver over Ethernet.
Program name
Description
Config files
Init file
Support command
Default
28
pppd
/etc/options
/etc/pap-secrets
/etc/chap-secrets
pppd
chat
pppdump
down
Table 4-8 pppd service path
pppoe
/etc/ppp/pppoe.conf
pppoe-connect
pppoe-setup
pppoe-start
pppoe-stop
pppoe-status
down
Table 4-9 PPPoE service path
--
--
JetBox 8100 User Manaual_Linux_1.1