Ntp Client - Korenix JetBox 8100 User Manual

3.3.2 NTP Client

The JetBox 8100 has a built-in NTP (Network Time Protocol) client that is
used to initialize a time request to a remote NTP server.
Use #ntpdate to update the system time.
#ntpdate time.stdtime.gov.tw
#hwclock –w
Figure 3-7 NTP client request
Visit http://www.ntp.org for more information about NTP and NTP server
addresses.
NOTE Before using the NTP client utility, check your IP and DNS settings
to make sure that an Internet connection is available. Refer to Chapter 2 for
instructions on how to configure the Ethernet interface, and see Chapter 4
for DNS setting information.
JetBox 8100 User Manaual_Linux_1.1
20