YASKAWA DX200 Instructions Manual page 31

165468-1CD
Form Cutting
5 Form Cutting Instruction
5.2 Registering Instructions
5. Change the numerical data.
– <Register without changing>
Press [ADD] and then [ENTER] to register the instruction in the input
buffer line without changing it.
– <Edit additional items>
To change the numerical data of the additional items, move the
cursor to the number to be changed and the number is highlighted.
Press [SHIFT] and the cursor keys at the same time to raise or lower
the number.
– To type the data from the number keys, select where to enter the
data, and the input line will be displayed.
Type the desired number and press [ENTER] to change the number
in the input buffer line.
– To add or change any additional items, move the cursor to the
instruction in the input buffer line. Then press [SELECT] to call up
the detailed editing dialog box.
5-4
HW1481987
31/49