YASKAWA DX200 Instructions Manual page 25

165468-1CD
Form Cutting
4 Form Cutting Start Motion Instruction
4.2 Registering Instructions
– To change a variable No., select the variable to be changed.
Type the new variable No., press [ENTER], and the number
changes.
– To add the radius, select {UNUSED} for {RADIUS}.
A selection dialog box is displayed. Select {R=}.
Add or change any other items in the same manner.
When the additional items are added or changed, press [ENTER].
The detailed editing dialog box closes, and the job text display
opens.
4. Press [ADD] and then [ENTER].
4-6
HW1481987
25/49