Wap Setting - NEC e132 Manual

NEC_e132_EN.book Page 52 Thursday, June 29, 2006 2:01 PM

WAP setting

• If the settings have already been made by the Service Provider,
you may browse immediately.
• If access profiles have already been assigned by your Service
Provider, select a profile and activate it.
• Otherwise you may key in the setting manually. For the correct
settings, contact your network operator or service provider.
Key in the service settings manually
1. In the WAP menu, select
2. Choose a profile, press
settings.
You need to enter Homepage, User ID, Password and IP address
information in to your phone. To get the information, you may need
to contact your service provider.
Dial type:
You can access WAP via GSM or GPRS.
1. In the WAP menu, select
2. Choose a profile, press
3. Select , and then choose either
Dial type
To get the GPRS access point, you may need to contact your service
provider for the service.
Activate WAP settings
After you complete all WAP settings, select
menu.
profile
Homepage
To launch the browser from standby mode, press the
connected, the homepage is displayed. Content depends on the
service provider.
To exit the browser, press the
.
WAP Profile
, and then select
Select
.
WAP profile
, and then select
Select
GSM
Activate
key.
52
e132
MENU STRUCTURE
to edit the
Edit
.
Edit
or .
GPRS
from the
WAP
key. Once