BandLuxe R560 Series User Manual page 71

Q: How do I configure my router when I use xDSL?
A: 1. On the GUI, go to Internet > Basic Setting > Ethernet Setting. Change the
connection type to PPPoE. Enter the username and password provided by
your ISP. Remember to connect your xDSL or Modem to the WAN Port of your
Router.
2. On the GUI, go to Internet > Basic Setting > Ethernet Setting. Change the
connection type to Static IP. Enter the information provided by your ISP.
Remember to connect your xDSL or Modem to the WAN Port of your Router.
Q: Can I prevent others from using my router?
A: Yes, there are some ways to prevent others from using your router.
1. Enable your WiFi client filter.
2. Disabled your SSID Broadcast.
3. Setting your WiFi security.
Q: My PIN code is enabled, where can I input the PIN code to use my Router?
A: Click on the menu tabs Network  Mobile Internet  U/SIM PIN Management.
Enter your PIN Code and click on
Q: Why does my U/SIM status display 'PIN Disable'?
A: Verify if your U/SIM card is inserted correctly into your
router and if it is properly activated by your ISP.
Q: Where can I change the password of my Router?
A: Click on the menu tabs System  Administration. Enter the new password on
both fields and click on
69
.
.
Appendix A: FAQ