BandLuxe R560 Series User Manual page 31

DHCP Service
DHCP Server:
Start IP Address:
Maximum Number
of Users:
Client Lease Time:
IP Address Range:
Primary DNS:
Secondary DNS:
Active DHCP Leases
This section displays active DHCP leases information for each client: Hostname, IPv4
address, MAC address, and Lease time remaining.
29
Enables or disables the DHCP Server feature.
Specifies the last 3 digits of the first assigned client IP
address. For example, the default value of 100 means that
the first assigned client IP address will be 192.168.1.100;
the next assigned client IP address will be 192.168.1.101;
and so on...
Specifies maximum number of users for this router.
Specifies the amount of lease time allocated to clients of
this router, i.e. the expiry time of leased addresses. Use 'h'
to indicate hours and use 'm' to indicate minutes.
Displays assignable local IP address range of this
If needed, specify the primary Domain Name System here.
If needed, specify the secondary Domain Name System
here.
Network
router.