BandLuxe R560 Series User Manual page 34

Network
IPv4-Gateway:
Metric:
Note: If some contents in the text box are invalid, a
side of the text box, and the text color will change to red. For example:
Routing and Redirection Service
This option enables or disables Network Address Translation (NAT) service, which is a
standard that allows multiple computers on a private network to share a single IP
address.
VPN Passthrough
A Virtual Private Network (VPN) is a type of secured private network connection, built
upon a publicly-accessible infrastructure such as the Internet. They usually provide
connectivity to various devices behind a gateway or firewall.
IPSec Passthrough:
PPTP Passthrough:
L2TP Passthrough:
32
If needed, a custom IPv4-Gateway address can be
specified here.
Specifies the network path priority number (usually
associated with the network path's administrative
distance). The lower the metric number, the higher the
priority of this static route in the network routing
protocol.
A different metric number can also be specified here.
IP Security (IPSec) provides authentication and
encryption. Since it is mainly a Layer 3 technology, it can
secure all data on the network. To allow IPSec tunnels to
pass through the Router, click 'Enabled'.
Point-to-Point Tunneling Protocol (PPTP) allows you to
establish a connection to an enterprise network. To allow
PPTP tunnels to pass through the Router, click 'Enabled'.
Layer 2 Tunneling Protocol (L2TP) is an extension of the
Point-to-Point Tunneling Protocol and is also used to
establish virtual private networks. To allow L2TP tunnels
to pass through the Router, click 'Enabled'.
will appear on the right