Upnp - BandLuxe R560 Series User Manual

In the status area, the message Unapplied Change may appear next to the
"Operator Name" to indicate that configuration changes are stored in the
Router.
6. More rules can be added to the Port Range Forward list by repeating steps 1-5.
7. (a) To enable or disable a Port Forward list rule, click on the check box under
'Enable'.
(b) To remove any Port Forwards rule, click on corresponding
8. To edit a particular Port Forward rule in detail, click on the corresponding
flexible and detailed than the settings from steps 1-1). After making any
changes click on
configuration page.
Note:

UPNP

Universal Plug and Play – Allows wired and wireless network devices to discover each
other and establish network services.
UPnP Settings
Here you can 'Enable' or 'Disable' the UPnP service.
52
button and the rule's associated configuration page will appear (more
. Finally, click on
Numerical and text values shown in the illustrations are for demonstration
purposes only and not for real configuration.
button.
to exit this