BandLuxe R560 Series User Manual page 52

Network
(i.e.
color changes back to black (i.e.
4. Filter Source Port: Enter the Source Port number to be filtered.
Click on
the IP Filtering list.
In the status area, the message Unapplied Change may appear next to the
"Operator Name" to indicate that configuration changes are stored in the
Router.
5. More rules can be added to the IP filtering list by repeating steps 1-0.
6. (a) To enable or disable a IP filtering list rule, click on the check box under
'Enable'.
(b) To remove any IP filtering rule, click on the corresponding
7. To edit a particular IP filtering rule in detail, click on the corresponding
button and the rule's associated configuration page (more flexible and detailed
than the settings from steps 1-4) will appear. After making any changes click on
. Finally, click on
Note:
50
). When the IP address entered becomes valid, the text
and the IP filtering rule you have just entered will be added to
Numerical and text values shown in the illustrations are for demonstration
purposes only and not for real configuration.
).
(a)
to exit this configuration page.
(b)
button.