Network
In the status area, the message Unapplied Change may appear next to
"Operator Name" to indicate that the configuration changes are temporarily
stored in the router.
7. More rules can be added to the Port Forward list by repeating steps 1 to 6.
8. (a)To enable or disable a Port Forward list rule, check the text box under
'Enable'.
(b) To remove any Port Forward rule, click on the corresponding
button.
9. To edit a particular Port Forward rule in detail, click on the corresponding
and detailed settings will appear. After making any changes click on
Finally, click on
Note:
44
button, and the rule's associated configuration page with more flexible
Numerical and text values shown in the illustrations are for demonstration
purposes only and not for real configuration.
to exit this configuration page.
(a)
(b)
.