BandLuxe R560 Series User Manual page 48

Network
5. Click on
the Port Triggering list.
In the status area, the message Unapplied Change may appear next to the
"Operator Name" to indicate that configuration changes are stored in the
Router.
6. More rules can be added to the Port Triggering list by repeating steps 1-5.
7. (a) To enable or disable a Port Triggering list rule, click on the check box under
'Enable'.
(b) To remove any Port Triggering rule, click on the corresponding
button.
8. To edit a particular Port Triggering rule in detail, click on the corresponding
flexible and detailed than the settings from steps 1-4). After making any
changes click on
configuration page.
Note:
46
. The port triggering rule you have just entered will be added to
button and the rule's associated configuration page will appear (more
. Finally, click on
Numerical and text values shown in the illustrations are for demonstration
purposes only and not for real configuration.
(a) (b)
to exit this