Konica Minolta bizhub C754E Installation Manual page 12

12. Touch "Copy", select "A3
press the start key.
A test pattern will then be produced on the
A3 or Ledger
13. Place the test pattern face down on the original
glass.
14. Place about ten sheets of A3
paper on the test pattern placed on the original
glass.
Lower the cover.
15. Press the start key.
The machine will start reading the test pattern.
16. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
17. Repeat steps from 12 through 15 to let the
machine read the test pattern two times.
Note:
Steps 12 to 15 must be performed three times in
total including two repetitions.
18. Touch "END."
×
/11 17 ", and
paper.
Cyan
A2X0IXC028DA
or Ledger
A2X0IXC027DA
<If A4 or Letter
6. Touch "Printer", select "A4
press the start key.
A test pattern will then be produced on the two
A4 or Letter
7. Place the test pattern face down on the original
glass.
8. Place about ten sheets of A3
paper on the test pattern placed on the original
glass.
Lower the cover.
9. Press the start key.
The machine will start reading the test pattern.
10. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
11. Repeat steps from 6 through 9 to let the
machine read the test pattern two times.
Note:
Steps 6 to 9 must be performed three times in total
including two repetitions.
E-12
paper is set in step 1>
½×11
/8 ", and
papers.
Magenta
A2X0IXC029DA
or Ledger
A2X0IXC027DA