Konica Minolta bizhub C754E Installation Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. All in One Printer
  5. bizhub C754e
  6. Installation manual

Konica Minolta bizhub C754E Installation Manual

Hide thumbs Also See for bizhub C754E:

Advertisement

Table of Contents

See also: Using
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
I. Outline of installation procedures
WT-509
AU-102
AU-201
WT-506
FS-534
SD-511
PK-520
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
• When transporting the machine, assign an ade-
quate number of persons to the job and follow
the specified correct procedures.
(mass: approx. 221 kg (487-3/16 lb))
INSTALLATION MANUAL
KP-101
Machine
SP-501
MK-715
*2
HT-508
Electronic system options
MK-735
KH-102
FS-534SD
OT-503
PK-521
SD-512
/
Applied Machines:
✱ Electronic system options
LU-204
LU-301
ZU-606
FS-535
*1
: No particular order in installation procedures
*2
: Varies depending on the applicable marketing area
E-1
/
*1
*1
EK-604
EK-605
*1
UK-204
*1
SC-508
*1
VI-506
*1
IC-414
FK-511
*2
*2
FK-508
MK-728
JS-602
PI-505
A2X0-9971-00
A2X0IXC001DA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the bizhub C754E and is the answer not in the manual?

Questions and answers

Related Manuals for Konica Minolta bizhub C754E

Summary of Contents for Konica Minolta bizhub C754E

  • Page 1 INSTALLATION MANUAL Applied Machines: <Important> Be sure to correctly follow the procedures in order as explained in this Installation Manual. If you do not follow the procedure in order, the image trouble may occur. I. Outline of installation procedures KP-101 ✱...
  • Page 2 II. Installation space (unit: mm (inch)) III. Pre-installation check items bizhub C754e + ZU-606 + FS-535 + LU-204 1. Select a level and stable place for installing the machine. 2. Be sure to use a power source of the voltage and 2556 (100-5/8) frequency indicated in the product specifications.

  • Page 3: Unpacking The Machine

    V. Accessory parts VI. Unpacking the machine Whether the slope is supplied with this machine or Name Q’ty not depends on your marketing areas. Follow the 1. User’s guide holder notes below. 2. Quick start guide Note: 3. Installation manual 1 set •...
  • Page 4 3. Hold onto the handle of the machine and tilt the 6. Position the slope as illustrated and drive nails in machine to the right and left. Under this condition, to fix the slope in position. remove the fixing materials (lower). Caution: Insert the nails in the outer holes.
  • Page 5 <B. When using the jig slope> 3. Hold onto the handle of the machine and tilt the machine to the right and left. Under this condition, 1. Open the shipping box and remove the packag- remove the fixing materials (lower). ing materials.

  • Page 6: Removing Protective Tape, Packing And Other Shipping Materials

    VII. Removing protective tape, packing 5. Holding onto the front cover and the back panel of the machine, slide the machine down along the and other shipping materials slope. Caution: 1. Remove the protective tape and protective mate- rials. Machine mass: 221 kg (487-3/16 lb) •...
  • Page 7 2. Open the right door and remove the protective 6. Remove the protective sheet from the control tape and the protective material. panel. Protective tape/ Protective material A2X0IXC014DA 7. Pull the tray 1 out and remove the protective tape from the tray. A2X0IXC074DA 3.

  • Page 8: Installing The Toner Cartridges

    10. Remove the protective tape from trays 3 and 4. 14. Open the upper front door and remove the pro- tective tape. Protective tape A2X0IXC076DA 11. Open the lower front door and remove the waste toner box. A2X0IXC075DA VIII. Installing the toner cartridges Note: Since no toner cartridges are supplied with the machine, purchase a toner cartridge (of different...

  • Page 9: Mounting The Accessory Parts

    IX. Mounting the accessory parts 3. Insert the toner cartridge into the machine. Note: 1. Attach the supplied caps A and B. Make sure that the color is same between insert- ing port and the toner cartridge. A2X0IXC019DA A2X0IXC060DA 2. Install the supplied scanner cover. (One supplied mounting screw) 4.

  • Page 10: Connecting The Power Cord

    4. Remove the protective cover from the supplied 2. Plug the power cord into the power outlet. stylus pen. Note: Discard the removed protective cover. C4004U139CA 3. To remove moisture from the paper in the tray, turn ON the switch shown in the illustration. A2X0IXC068DA Note: 5.
  • Page 11 XII. Adjusting touch panel <If A3 or Ledger paper is set in step 1> × 6. Touch “Printer”, select “A3 ”, and 1. Press the Menu key. press the start key. 2. Touch “Accessibility.” A test pattern will then be produced on the A3 3.
  • Page 12 × 12. Touch “Copy”, select “A3 ”, and <If A4 or Letter paper is set in step 1> press the start key. ½×11 6. Touch “Printer”, select “A4 ”, and A test pattern will then be produced on the press the start key. or Ledger paper.

  • Page 13: Install Date

    XV. Date/Time setting (Service Mode) ½×11 12. Touch “Copy”, select “A4 ”, and press the start key. 1. Make sure that the Service Mode screen is dis- A test pattern will then be produced on the two played. or Letter papers.

  • Page 14: Unit Change

    XVIII. Unit change XX. Adjusting the height 1. Check the clearance between the upper face of Note: scanner and the protrusion on the reverse auto- This function allows the user to select the type of matic document feeder side (2 spots, front/back). message that will appear when the replacement * There must be no clearance between the protru- time arrives for each of the different units.
  • Page 15 XXI. Adjusting leading edge skew (front 6. Obtain the difference between the deviation of the chart and the deviation of the sample. side) Difference of the deviation = Y - X Specifications: 0 ± 2.0 mm Note: * If the difference of the deviation does not fall Perform this adjustment if necessary.
  • Page 16 XXII. Adjusting leading edge skew (back 9. When the difference of the deviation is - (minus), turn the adjustment screw located at the back of side) the reverse automatic document feeder counter- clockwise to adjust. Note: Note: Perform this adjustment if necessary. •...
  • Page 17 5. Open the reverse automatic document feeder 9. Turn the adjustment dial according to the differ- and remove the two screws shown in the illustra- ence of the deviation. tion. When the difference is a positive (+) value, turn the dial clockwise When the difference is a negative (-) value, turn the dial counterclockwise A2X0IXC039DA...

  • Page 18: Magnification Adjustment

    XXIII. Magnification adjustment 13. Place the chart in the document feeding tray (with the side having an arrow facing up). <Magnification in the feeding direction> 14. Press the start key, and check the difference in Note: the width C between the chart and the dis- Perform this adjustment if necessary.
  • Page 19 18. Display the Service Mode screen, and touch 30. Check whether the difference in the width D “ADF.” between the chart and the copy sample is within the specified range. Note: Difference in the width D = D of the copy sample If the Test Copy screen on the Service Mode is –...

  • Page 20: Mixed Original Size Adjustment

    XXIV. Mixed original size adjustment 3. Place the chart in the document feeding tray. (Make sure that the blank surface of the chart Note: faces up.) Perform this adjustment if necessary. 1. Display the Service Mode screen. (For details of how to display the Service Mode screen, see the service manual.) 2.
  • Page 21 15. Place the chart in the document feeding tray. 20. Make a duplex copy sample in full size. 1-Side: With the side having an arrow facing Note: If the Test Copy screen on the Service Mode is 2-Side: With the blank side facing up displayed, touch “2-Sided ->...
  • Page 22 XXVI. Changing paper size (Tray 3 and 4) 31. Press the start key, and check the difference in the width A between the chart and the dis- 1. Turn OFF the Main Power Switch. charged copy sample. 2. Pull out the tray 3. 32.
  • Page 23 XXVII. Affixing the tray labels/paper size 5. Align the paper guide plate (rear) with the line marked in the bottom of the tray. Secure the labels paper guide plate. (Four screws) Note: Affix the tray labels or paper size labels at the loca- tions shown in the illustration.

  • Page 24: Connecting The Network Cable

    XXIX. Check through test print XXXI. Performing Non-Image Area Erase Check Make operation checks using “Setting Information Print.” Note: 1. Select the function to be used as follows: Perform the below at the site where customer Menu → Utility → User Settings → Printer Set- uses the machine.
  • Page 25 XXXII. Network setting XXXIII. Installing the user’s guide holder/ spacer Make the TCP/IP address setting for the network. Note: 1. Install the user’s guide holder. Consult the network administrator for the setting value to be entered and make settings as required.
  • Page 26 XXXV. Installing the set guide for banner paper Open the manual bypass tray and set the set guide for banner paper. A2X0IXC025DA E-26...

  • Page 27: Accessory Parts

    SP-501 Stamp Unit INSTALLATION MANUAL I. Accessory parts II. Installation procedures 1. Turn off the machine and unplug the power cord Name Shape Q’ty from the power outlet. 1. Stamp unit 2. Open the left cover of the reverse automatic doc- ument feeder.
  • Page 28 6. Remove the screw shown on the illustration. 11. Mount the plate cover that has been removed in step 5. (Two screws) 12. Mount the mounting plate removed in step 3. (One screw) 13. Set the document feeding tray down. 14.

This manual is also suitable for:

Bizhub c654e

Table of Contents