Rear View - IBM xSeries 440 Troubleshooting Manual

Rear view

System power connectors (1 and 2): The system power cords are connected to
these two connectors to provide power to the system.
RXE Expansion Port B: Use this port to connect the server to a remote I/O enclosure
when two SMP Expansion Modules are installed.
Auxiliary pointing device connector: Signal cables for a mouse, trackball, or other
pointing device are connected to the auxiliary pointing device connector.
Keyboard port: Signal cables for a keyboard are connected to the keyboard port.
Remote Supervisor Adapter ports and indicators: This group of ports and
indicators located on the back of the server are used for system management
information and control.
•
•
4
xSeries 440:Troubleshooting Guide
System power
System power
connector (1) connector (2)
SMP Expansion Port 1
SMP Expansion Port 2
SMP Expansion Port 3
SCSI port
RXE Management Port
Error LED
(amber)
External power
connector
Power LED
(green)
External power connector - This connector is not supported on this server.
Error LED - This amber light goes on when a system management error has
occurred.
RXE Expansion Port (B)
Auxiliary pointing
device connector
Keyboard port
USB 1
USB 2
Video port
ASM interconnect Ethernet link LED
port (green)
Management port
Remote
Supervisor
Adapter
ports
Ethernet
activity light
Ethernet
link light
Gigabit Ethernet
port
RXE Expansion
Port (A)
Ethernet activity LED
(green)
10/100
Ethernet port