Impact Absorbing Chest Pads - Britax BOULEVARD CLICKTIGHT Canadian User Manual

BRITAX Child Safety, Inc.
5. Replace the cover and
close the CLICKTIGHT.
IMPORTANT: The seat
cover must be tucked
behind the red markers
on the CLICKTIGHT bar.

Impact Absorbing Chest Pads

IMPORTANT: Impact absorbing chest pads are highly
recommended for forward-facing mode. Removal of chest
pads is optional for rear-facing mode to ensure a snug fit
for small infants.
Removing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Press harness
adjuster button.
b. Pull both harness
straps forward.
2. Adjust the harness to
the lowest position and
unhook the harness
straps from the yoke at
the back of the child seat.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad,
chest pad, and the chest
clip.
5. Reroute the harness strap
back through the chest
clip and comfort pad,
ensuring that the harness
strap is not twisted.
6. Repeat for other strap.
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass over
the tube.
40
1b
1a
TUBE
BOULEVARD CLICKTIGHT Canadian User Guide
8. Nest the end of the left
harness strap into the
right.
9. Slide the harness straps
completely onto the yoke.
Ensure that the adjuster
and harness straps are
not twisted and that
the ends of the harness
straps are securely
attached to the yoke.
IMPORTANT: Store the
chest pads in a safe
location when not in use.
Replacing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Press harness
adjuster button.
b. Pull both harness
straps forward.
2. Adjust the harness to
the lowest position and
unhook the harness
straps from the yoke at
the back of the child seat.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad
and chest clip.
5. Reroute the harness strap
through the chest pad,
chest clip, and comfort
pad.
6. Repeat for other strap.
1b
1a
41