Storing The Lower Connector System (Lcs); Recline Adjustment; Infant Body Pillow; Chest Clip - Britax Boulevard CS User Manual

Hide thumbs Also See for Boulevard CS:
Table of Contents

Advertisement

Available languages

Available languages

Child Seat Functions
Storing the Lower Connector
System (LCS)
When the LCS connector is not in use, lift the
cover to access the LCS storage slots (Fig. A).
Fold the LCS adjuster and the connector, then
slide each set into the adjacent slot.
NOTE: Child seats are shipped from Britax with the
LCS connectors in the storage slots.

Recline Adjustment

Pull the recline handle (Fig. B) then slide
the child seat shell into the desired position.
Release the recline handle, then verify the child
seat has locked into position.
WARNING!
This child seat must not be used
forward-facing for children less than
one year of age OR who weigh less
than 9.1 kg (20 lbs).
This child seat must be in full upright
position when installed forward-
facing for children who weigh more
than 15.1 kg (33 lbs).
NOTE: It will be necessary to loosen the tether,
vehicle seat belt, and/or LCS strap before adjusting
the recline position. The tether, vehicle seat belt,
and/or LCS strap must be properly re-tightened after adjusting the recline
position.

Infant Body Pillow

The Infant Body Pillow is designed to provide better fit and comfort for
infants using this child seat. For additional side support, fold the side
flaps inward (Fig. C).
NOTE: Remove the Infant Body Pillow after child can sit comfortably in the
child seat without additional support.
30

Chest Clip

Fastening the Chest Clip
Fasten the chest clip by pushing the two halves
together until a positive click is heard (Fig. D).
Releasing the Chest Clip
1
A
2
Adjusting the Chest Clip
1
2
B
HUGS™ Chest Pads
C
Squeeze the middle tabs together (Fig. E).
Pull the two pieces apart.
Slide the chest clip up or down (Fig. F) on
the harness so it is positioned at the middle
of the child's chest, level with the child's
armpits.
Slide the HUGS
™ chest pads and comfort
pads to a comfortable location for the child.
WARNING!
HUGS™ chest pads
must be installed for forward-facing use.
Removal of HUGS is optional only for rear-
facing use.
Child Seat Functions
D
E
F
31

Advertisement

Table of Contents
loading

Table of Contents