Cleaning - Britax BOULEVARD CLICKTIGHT Canadian User Manual

BRITAX Child Safety, Inc.
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass over
the tube.
8. Nest the end of the left
harness strap into the
right.
9. Slide the harness straps
completely onto the yoke.
Ensure that the adjuster
and harness straps are
not twisted and that
the ends of the harness
straps are securely
attached to the yoke.
42
BOULEVARD CLICKTIGHT Canadian User Guide

Cleaning

Shell
TUBE
Cover
Harness
Harness
Buckle
Anti-
Rebound
Bar
• SPONGE CLEAN the
shell using warm water
and mild soap.
• TOWEL DRY.
• HAND WASH the
cover using cold water
and mild soap.
• LINE DRY to prevent
the cover from
shrinking.
• SPONGE CLEAN the
harness using warm
water and mild soap.
• TOWEL DRY.
• THOROUGHLY RINSE
the buckle using warm
water.
• TEST THE BUCKLE
by fastening and
unfastening until a
click is heard after
inserting each buckle
tongue. If clicks are
not heard, repeat the
cleaning procedure.
• TOWEL DRY.
• SPONGE CLEAN the
anti-rebound bar using
warm water and mild
soap.
• TOWEL DRY.
DO NOT
• Use abrasive
cleaners.
DO NOT
• Bleach
• Machine wash
• Machine dry
• Iron
DO NOT
• Disassemble the
harness
• Bleach
• Machine wash
• Machine dry
• Iron
DO NOT
• Soak
• Lubricate
• Use solvents
• Use soap or
household
detergents
DO NOT
• Disassemble
• Bleach
• Machine wash
• Machine dry
• Iron
43