Using The Impact Absorbing Tether - Britax GROW WITH YOU CLICKTIGHT Series User Manual

GROW WITH YOU CLICKTIGHT / PLUS User Guide
To remove the lower connector from the storage slot or
lower anchor:
1� Press and hold the red
release button�
2� Pull the lower connector
from the storage slot or
lower anchor�

Using the Impact Absorbing Tether

Attach the tether only to tether anchors identified by your
vehicle manufacturer as tether anchorage points�
If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or
contact your vehicle man u fac tur er for assistance� DO
NOT modify your vehicle without advice from your
vehicle manufacturer�
HARNESS MODE: Britax recommends that the top
tether be used at all times when installing the child seat�
Using the top tether will improve the stability of your child
seat and reduce the risk of injury�
BOOSTER MODE: Do not use top tether without
securing lower connectors�
Tether anchor locations vary
from vehicle to vehicle� Check
your vehicle owner's manual
and look for the tether anchor
symbol shown in the diagram
to help identify where the top
tether anchor point is located
in your vehicle�
To attach the tether to a
tether anchor:
1� Remove the webbing
from the elastic strap and
loosen the tether�
WARNING!
Or
Or
27 27