Using The Lower Universal Anchorage System (Luas); Lower Connectors - Britax BOULEVARD CLICKTIGHT Canadian User Manual

Hide thumbs Also See for BOULEVARD CLICKTIGHT:
Table of Contents

Advertisement

Available languages

Available languages

BRITAX Child Safety, Inc.

Using the Lower Universal Anchorage System (LUAS)

The Lower Universal Anchorage System, or LUAS, is a
system available on this child seat that offers an alternative
to vehicle seat belt installation methods. The figure below
shows typical locations for lower anchors and tether anchors
in a vehicle. See pages 2-3 for LUAS components on this
child seat.
LUAS ANCHOR LOCATIONS
Lower Anchors
27.9 cm (11 in.)
Tether
Anchor
Check your vehicle owner's manual to learn if it is equipped
with LUAS, the maximum weight rating for the lower
anchors, tether anchors capacities, and information on the
lower anchor locations and designated seating positions
available for use with this child seat.
28
Lower
Anchors
BOULEVARD CLICKTIGHT Canadian User Guide

Lower Connectors

Using the Lower Connectors
The lower connectors are located in the back of the base
of the child seat. Store the connector assembly in the
compartment when not in use.
To attach the lower connectors:
1. Remove the lower
connectors from the
storage compartment at
the rear of the seat and
pull the strap to full length
toward the child's left
side.
2. Press the lower connector
hook over its adjacent
lower anchor. For full
installation instructions
see pages 10-11 or 16-17.
To remove the lower connectors:
1. Push the lower connector
adjuster release button to
loosen the lower connector
strap.
NOTE: Open the
CLICKTIGHT if more slack
is needed.
2. Squeeze the lower
connector hook and lift off
the lower anchor.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents