Lap Belt Installation - Britax BOULEVARD CLICKTIGHT Canadian User Manual

BRITAX Child Safety, Inc.

Lap Belt Installation

1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open
2. Attach the anti-rebound
bar (see page 27).
3. Recline the unoccupied
child seat and place rear-
facing on the vehicle seat
(see page 25).
4. Slide the vehicle belt into
the rear-facing belt slots.
5. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
6. Lock and remove slack
from the vehicle belt.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
12
1a
1b
BOULEVARD CLICKTIGHT Canadian User Guide
7. Close the CLICKTIGHT.
– A click confirms the
CLICKTIGHT is secure.
Rear-Facing Installation with Lap Belt
9 Ensure that the logo on the CLICKTIGHT dial has
returned to a horizontal position.
9 Ensure that the anti-rebound bar is properly installed
(see page 27).
9 Ensure that the ball in the recline indicator is within
the allowable blue section for the size of the child (see
page 25).
9 Check that all connections are secure and straps are
not twisted.
9 Check that the child seat cannot be moved front to
back or side to side more than 2.5 cm (1 in.) at the belt
path. If the child seat is not secure, repeat installation
or use a different seating location.
13