Reassembling Procedure; 1 ] Reassembling The Mecha Assy - Brother TD-4000 Service Manual

3.5 REASSEMBLING PROCEDURE

[ 1 ] Reassembling the Mecha ASSY

NOTE: Be careful not to cut your finger with the edge of the parts.
(1) Assemble the tape feed motor ASSY and FG harness ASSY onto the chassis R
sub ASSY with the two screws.
NOTE: Pay attention to the direction of the tape feed motor ASSY.
Tape feed motor ASSY
Figure 3.5-1 Reassembling the Mecha ASSY (1)
III - 36
Chassis R sub ASSY
Screw, bind M3 x 4
FG harness ASSY
Screw, bind M3 x 4