7 ] Removing The Upper Cover - Brother TD-4000 Service Manual

[ 7 ] Removing the Upper Cover

(1) Turn the machine upside down.
(2) Remove the four screws and remove the lower plate ASSY from the machine.
(3) Disconnect all connectors and FFC from the main PCB ASSY.
Tape feed motor ASSY
Tape sensor PCB ASSY
Cutter home position sensor
Screws
Figure 3.4-12 Removing the Lower Plate ASSY
Main PCB ASSY
SB PCB ASSY
Figure 3.4-13 Removing the Connectors and FFC
Lower plate ASSY
Screw
Screw
Fan motor
Cutter motor ASSY
Head ASSY
III - 13
DC power PCB ASSY
Sub ASSY SW
(220/230/240V model only)
Cover open sensor