Brother TD-4000 Service Manual page 125

(7) Feed & Cut Test (Cut test)
Inspect whether the tape feeding and the tape cutting work correctly.
1) Click the "Cut test" button.
2) Set the free length roll (102mm) into the machine, and press the FEED button
on the machine.
3) Wait the feeding of the paper. Then, if the "feed test OK" message appears in
the "Results" column, press the CUT button on the machine.
4) The cutting is finished. Then, if the "feed and cut test OK" message appears in
the "Results" column, click the "Quit cut test" button on the tool.
The judgement is "OK".
Figure 20. Feed & Cut test
Tool: Click the "Cut test" button.
Machine: Press the FEED button.
Machine: Press the CUT button.
Figure 21. "Cut Test" flow
1 - 12
Tool: Click the "Quit cut test"
button.
The result of cut testing
is displayed.