Brother TD-4000 Service Manual page 130

7) If printing of the free length roll (102mm) and the die cut roll (51mm x 26mm)
are finished, the "OK" button is enabled. If the adjustment of the margin is
completed, click the "OK" button. If not, click the "NG" button. Then, proceed
to the next inspection.
• "Print test (continuous) (A)"
• "Print test (50mm 1Label) (C)"
When each is performed once, the "OK" button is enabled.
Figure 30. "OK", "NG" and "Cancel" button
The judgement is "OK".
Figure 31. Successful completion of adjustment print test
1 - 17