11 ] Disassembling The Panel Cover - Brother TD-4000 Service Manual

[ 11 ] Disassembling the Panel Cover

(1) Release the harness of the SB PCB ASSY from the guide.
(2) Remove the two screws and remove the SB PCB ASSY, cover sensor arm R and
SB PCB sheet from the panel cover.
Cover sensor arm R
Screw
Screw
SB PCB ASSY
SB PCB sheet
SB PCB ASSY
Panel cover
Guide
Harness
Figure 3.4-36 Disassembling the Panel Cover (1)
III - 29