Appendix 1 Serviceman Software Tool; Role And Use Procedure Of The Reset Software Tool; Role Of The Reset Software Tool; Use Procedure Of The Reset Software Tool - Brother TD-4000 Service Manual

APPENDIX 1 SERVICEMAN SOFTWARE TOOL

1.1 Role and Use Procedure of the Reset Software Tool

1.1.1

Role of the Reset Software Tool

This tool serves to reset the EEPROM and check the serial number.
Caution: Be sure to reset the EEPROM before making an examination with a
serviceman software tool after repair work is done.
1.1.2

Use Procedure of the Reset Software Tool

(1) Connect the machine (TD-4000 or TD-4100N) to your PC with the USB cable and
turn the POWER button ON.
(2) When there is not a driver in your PC, "Found New Hardware Wizard" screen is
displayed. In this case, click the "Cancel" button.
Figure 1. "Found New Hardware Wizard" screen
1 - 1