Brother TD-4000 Service Manual page 91

(5) Turn the machine upside down.
(6) Connect all connectors and FFC to the main PCB ASSY.
(7) Hang the harnesses on the slits of the machine.
Power supply PCB
Main PCB ASSY
Tape sensor
PCB ASSY
Cutter home
position sensor
Slit
Slit
SB PCB ASSY
(8) Assemble the lower plate ASSY onto the machine with the four screws.
Taptite, bind B M2.6 x 8
Tape feed motor ASSY
Slit
Slit
Slit
Figure 3.5-43 Connecting the FFC and Connectors
Figure 3.5-44 Installing the Lower Plate ASSY
Head ASSY
Head ASSY
Slit
Lower plate ASSY
Taptite, bind B M2.6 x 8
III - 66
Slit
Fan motor
DC power PCB ASSY
Sub ASSY SW
(220/230/240V model
only)
Cutter motor ASSY
Cover open sensor
Inlet