9 ] Removing The Front Cover, Panel Cover And Front Side Cover - Brother TD-4000 Service Manual

[ 9 ] Removing the Front Cover, Panel Cover and Front Side Cover

(1) Remove the two screws and release the hook "A" of the front cover from the rib
of the under cover.
(2) Release the two hooks "B" of the front cover from the holes on the cutter unit
ASSY to remove the front cover.
Under cover
Hook "A"
Front cover
(3) Remove the cover sensor arm L from the front cover.
Cover sensor arm L
Screw
Figure 3.4-30 Removing the Front Cover
Front cover
Figure 3.4-31 Removing the Cover Sensor Arm L
Screw
III - 25
Hooks "B"
Front cover
Cutter unit ASSY