3 ] Removing The Bottom Cover - Brother PT-1800 Service Manual

[ 3 ] Removing the Bottom Cover

(1) Close the cassette cover while pressing down sections "B."
(2) Turn the machine upside down.
(3) Remove seven screws from the bottom cover.
(4) Apply your fingers to the bottom cover and pull it up.
When you separate the bottom cover from the boy cover, the cassette cover may
also be removed.
(5) Open the bottom cover to the left as shown below.
(6) Disconnect the power supply harness from the main PCB.
NOTE: Check that the base plate feet are tightly attached to the bottom cover without
any gaps, peeling-off, or overreaching.
Figure 2.2-3 Removing the Bottom Cover (1)
Figure 2.2-4 Removing the Bottom Cover (2)
II - 10