Install The Remote Mount Board On The Motherboard; Mount The Super Capacitor Pack Module To The Intel® Server Chassis - Intel RMFBU4 Quick Installation User's Manual

General Installation Process
9
Install the Remote Mount Board on the
Motherboard
A
Make sure that the power to the chassis is still turned off, the power
cords are unplugged, and the chassis is grounded and has no AC
power.
B
Insert the remote mount board in a PCIe slot on the motherboard,
as shown in the following figure.
NOTE: Some PCIe slots support only PCIe graphics cards. If a
remote mount board is installed in one of these slots, the
remote mount board will not function. Refer to your computer
documentation for information about the PCIe slot.
C
Press down gently, but firmly, to seat the board correctly in the slot.
D
Use the bracket screw to secure the remote mount board to the
system chassis.
Bracket
Screw
RMFBU4 module
Edge of
Motherboard
E
Reinstall the computer cover, and reattach the power cords.
F
Turn on the power to the computer.
Refer to the Intel ® RAID Software User Guide for information about
running the RAID configuration utility and installing the software
drivers.
Press
Here
Super Capacitor Pack
module
Press
Here
Remote Mount
Board
PCIe Slot
Intel ® RAID Controller
RS3DC080 as shown
10
Mount the Super Capacitor Pack Module
to the Intel® Server Chassis
NOTE: Most of the Intel
mount the Super Capacitor Pack module clip; the remote
mount board is not needed in this kind of scenario. Refer to the
Intel ® Server System User Guide for details of the position
where the Super Capacitor Pack module clip can be mounted.
A
Ground yourself, and make sure that the system is grounded.
B
Place the Super Capacitor Pack module and the clip front-side-up
on a flat, clean, static-free surface.
C
Press the Super Capacitor Pack module into the clip until the
module clicks firmly into place, as shown in the following figure
(for reference only; actual shape of the product may vary from the
figure).
C
D
Locate the mounting holes for the Super Capacitor Pack module
clip in the Intel ® Server Chassis.
E
Align the tabs on the clip with the mounting holes in the Intel
Server Chassis and slide the clip until the clip engages with the
mounting holes.
E
5
® Server Chassis provide a position to
®
Fan Bulkhead
D