Intel RMS3JC080 Quick Installation User's Manual

Raid module

Advertisement

Quick Links

Intel® RAID Module RMS3JC080
Quick Installation User's Guide
Thank you for buying an Intel® RAID Module. Your Intel® RAID Module provides
reliability, high performance, and fault-tolerant drive subsystem management, and it
offers an ideal RAID solution for the internal storage of workgroup, departmental, and
enterprise systems.The following information will help you assemble your Intel ® RAID
Module and install components.
Perform all installation work at an electrostatic discharge (ESD)-safe workstation that
meets the requirements of EIA-625, Requirements for Handling Electrostatic
Discharge Sensitive Devices. You must perform all actions in accordance to the latest
revision of the IPC-A-610 ESD-recommended practices.
This guide and other supporting documents are located on the web at:
http://www.intel.com/support.
H46880-001

Advertisement

Table of Contents
loading

Summary of Contents for Intel RMS3JC080

  • Page 1 Intel® RAID Module RMS3JC080 Quick Installation User's Guide Thank you for buying an Intel® RAID Module. Your Intel® RAID Module provides reliability, high performance, and fault-tolerant drive subsystem management, and it offers an ideal RAID solution for the internal storage of workgroup, departmental, and enterprise systems.The following information will help you assemble your Intel ®...
  • Page 2 (This page is intentionally left blank.)
  • Page 3: Table Of Contents

    Configure and Install the SAS/SATA Devices ............3 Connect the RAID Module to the SAS/SATA Devices ........3 Power up the System ....................... 3 Run the Intel® RAID BIOS Configuration Utility ............ 3 Install the Operating System Driver ................4 Reference Documents ........................4...
  • Page 4 Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as ® the property of others. Copyright © 2014, Intel Corporation. All rights reserved.
  • Page 5: Product Overview

    Product Overview The Intel ® RAID Module RMS3JC080, which is based on the LSISAS3008 I/O controller, uses an 8-MB Flash memory device for storing the BIOS and firmware and controls eight internal SAS/SATA ports through two SFF-8643 mini-SAS HD-4i internal connectors.
  • Page 6: General Installation Process

    A low-profile bracket is included with the RAID module. If the RAID module appears to be damaged or the low-profile bracket is missing, contact Intel or your reseller support representative.
  • Page 7: Configure And Install The Sas/Sata Devices

    The firmware takes several seconds to initialize. During this time, the RAID module scans the ports. Run the Intel® RAID BIOS Configuration Utility Run the Intel ®...
  • Page 8: Install The Operating System Driver

    file that accompanies the appropriate driver. Reference Documents If you need more information about any topic covered in this guide, refer to the following documentation on the Intel website at http://www.intel.com/support: • 12Gb/s Intel ®...
  • Page 9 (This page is intentionally left blank.)
  • Page 10 H46880-001...

Table of Contents