Vlan Screen - ZyXEL Communications GS1200-5HP v2 User Manual

3.2 VLAN Screen

Use this screen to view and configure VLAN settings for the Switch. Click VLAN in the navigation panel to
open the following screen.
Note: You could block yourself (and all others) from managing the Switch if you remove all
ports from the management VLAN (VLAN 1 by default).
Note: Make sure the port through which you connect your computer and access the Switch's
web configurator is in VLAN 1.
Figure 7 VLAN
The following table describes the labels in this screen.
Table 3 VLAN
LABEL
PVID
Port
PVID
Apply
Maximum
number of IEEE
802.1Q VLAN
Chapter 3 VLAN
DESCRIPTION
This field displays the port number.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so
that the frames are forwarded to the VLAN group that the tag defines.
Enter a number between 1 and 4094 as the port VLAN ID.
Click this button to save your PVID settings to the Switch.
This shows the maximum number of IEEE 802.1Q VLANs you can have on the Switch.
GS1200 Series User's Guide
35